Filtration Separation Purification

Omnifit bubble traps enable effective, in-line removal of bubbles from aqueous solutions with or without vacuum assistance. Despite using degassing solvents, dissolved gases can form damaging bubbles in pumps and detectors. Located between the reservoir and the pump, the Omnifit bubble traps force bubbles through a microporous hydrophobic membrane to avoid damaging sensitive fluid components. The Omnifit traps and is available in standard or high-flow designs.

· Available with PEEK or PVC body construction

· Available to use as stand-alone or with vacuum pump

· Flow rates up to 60 milliliters (mL) per minute

· System-side differential operating pressure of 30 psi

Vapor traps enable you to isolate any solvent vapor escaping from your system during pressure venting without the need to place the system into a fume hood. The activated carbon within the component confines vapors to prevent egress into the laboratory. An indicator strip on the component provides a simple color-changing indicator to indicate when the vapor trap is saturated. When the strip turns red, it’s time to replace your vapor trap.

· Simplified saturation status through integrated color indicator

· Compatible with Omnifit T-Series Waste Caps

· Connection to threaded male 1/4”-28 UNF ports

Media filtration is needed to ensure solvents are free from particulate matter. A variety of filtration options are available, including both reservoir and in-line systems.

Reservoir filters and bubblers are simple and effective solvent filtration solutions. The Omnifit reservoir filters are ideal for applications using harsh chemicals. These bottom-of-bottle filters are constructed entirely from PTFE with slots designed in the body to minimize waste by removing virtually all liquid from the bottle.

In-line filters protect sensitive instrumentation, such as solenoid valves, from damage. These highly inert, microporous filters are ideal for applications involving aggressive and high-purity fluids. A distribution pattern machined onto both sides of the filter housing ensures that liquid is spread across the entire filter to ensure maximum usage of the filter area. With easy in-line installation and simple replacement, these filters are available with both 20 µm and 50 µm porosity.

Choose from a variety of filtration options:

· Reservoir Filters: 10 µm porosity filters ensure even the smallest particulates are removed in harsh chemical systems.

· Filter Bubblers: PTFE or stainless steel construction are suitable for sparging and filtration applications.

· In-Line Filters: Optimal filtration for aggressive and high-purity fluids protects sensitive instrumentation.