Type P ferrules are a flangeless tube connection system that incorporates a PTFE seal housed in a 316 stainless steel or PEEK casing. The Type P fitting system uses a one-piece ferrule, which fits permanently to the outside of the semirigid tubing for applications that require high purity and chemical resistance.

· Compatible with 1/16” or 1/8” OD tubing

· Rated up to 1,000 psi

The Type S fitting system uses a two-piece ferrule that fits permanently to the outside of the tubing. Two-part ferrules consist of an inner PEEK or ETFE sealing surface and a stainless steel lock ring, with only the inner portion in the fluid path, for applications that require high pressure and low dead volume.

· Compatible with 1/16”, 1/8”, or 3/16” OD tubing

· Pressure rated up to 2,500 psi

Gripper fitting systems use a one-piece ferrule that fits permanently onto the outside of semirigid tubing. Ferrules have an outer stainless steel or PEEK casing and an inner PTFE sealing face, ensuring that only PTFE is in the fluid path for high chemical resistance and repeated connections.

· Compatible with 1/16” or 1/8” OD tubing

· Pressure rated up to 1,000 psi

Inverted cones provide a reusable, nonpermanent, low-pressure connection with only the ETFE cone in the fluid path. A recess in the fitting houses the inverted cone, allowing maximum thread engagement with the port ensuring the system stays sealed even in shallow PTFE ports.

· Compatible with 1/16”, 1/8”, or 3/16” OD tubing

· Pressure rated up to 250 psi